DMA Troubleshooting

Please look for the same or a similar issue to yours and follow the steps required to fix it. For some issues there are many solutions, please try all of them.

Failed to connect to memory acquisition device

MemProcFS: Failed to connect to memory acquisition device.
[!] Failed to initialize DMA
Exit Code: 1585250304
Finished execution

• For majority of cases, fixing this issue is as simple as fully shutting down both PCs, waiting a few seconds, taking your DMA out and plugging it back in (rarely needed), unplugging and replugging your DMA cable and then turning both of your PCs back on.
• You need to follow the guide on setting up your 2nd PC for your DMA card. If you haven't done everything in that guide or you didn't do it correctly you will undoubtedly get this error.

Unable to locate valid DTB #x

[!] Loading MMap
[CORE] Initialization failed. Unable to locate valid DTB. #2
vmemProc: Unable to auto-identify operating system for PROC file system mount.
Specify PageDirectoryBase (DTB/CR3) in -cr3 option if value if known.
[CORE] Failed to initialize.

[!] Failed to initialize DMA
Exit Code: 2700345344
Finished execution

• This is usually fixed by creating an MMap file. Follow our Generating a MMap guide.
• This issue could also get fixed by performing a full shutdown and restart of both PCs.
• Another reason for this issue could be due to virtualization being enabled on your gaming PC. If you have an Intel CPU, you need to disable "VT-d" / "VT-x", whereas if you have an AMD CPU, you need to disable "SVM Mode" and "IOMMU". The process may vary slightly for each motherboard, so you can search Google for a tutorial specific to your motherboard model. If you have a Gigabyte motherboard you may need to contact them for a working BIOS version.
• Your outdated firmware can also be the cause for this. If you've already been setting this error since your firmware was flashed (or if you've tried all the above solutions), contact support for assistance.

Slow or stuck progress/searching speeds

If your DMA is working but seems to be very slow or gets stuck at certain percentages when searching, you should try creating an MMap file. Follow our Generating a MMap guide.

Some players or items not showing up on ESP/Aimbot

This is usually caused by memory mapping issues. Creating an MMap file often resolves this problem. Follow our Generating a MMap guide.

Additional Resources

If you're still experiencing issues after trying these solutions, please join our Discord server and open a support ticket. Our team will be happy to assist you further.